These eight attachments make fast work of landscaping duties

Whether or not it’s shifting rocks and particles, hacking via brush and bushes, or eradicating stumps, these eight attachments will flip your excavator or loader right into a landscaping machine.


Separate rock from soil

Caterpillar designed its line of Skeleton Buckets to separate rocks and enormous particles from soil and sand extra immediately than with a stable leading edge. They can be used for grading. The all-steel buckets are available in widths of 79, 87 or 94 inches and are appropriate with skid steers, compact monitor loaders, compact wheel loaders and multi-terrain loaders. Heavy rods which can be 1.25 inches in diameter are positioned on 3.75-inch facilities to kind the buckets’ ground and again. The buckets function thick plates with rectangular openings and metal gussets welded between the outermost rods within the bucket ground and the perimeters.

Deal with bushes, brush, grass

Kubota SC70 Skid CutterThe Kubota SC70 Skid Cutter is a 6-foot-wide heavy-duty attachment with a 7-inch slicing capability for tackling small bushes, shrubs, bushes and grass. Designed for Kubota’s SVL95-2 compact monitor loader, the deck and aspect skirts are product of quarter-inch metal. The three-piece deck design has fewer weld factors for added power. Commonplace security options embrace entrance and rear chains, a pusher bar, and a patent pending bi-fold door that covers the slicing chamber when not slicing in heavy brush. A case drain and motor strain gauge are non-compulsory.


Sweep rocks and particles

Worksaver SARG (Sweep Action Rock Grapple)Worksaver’s SARG (Sweep Motion Rock Grapple) for skid steer loaders is designed for dealing with rocks, brush, logs, stumps and particles. Two fashions can be found – the SARG-72 at 72 inches extensive and the SARG-84 at 84 inches extensive. The entrance grapples present 66 levels of sweep for shifting particles and rocks of varied sizes into the bucket. The sweep clamp retains the rocks or particles within the bucket whereas the operator rocks the attachment to sift out the dust. Grapples work independently of one another, shifting like fingers, so the machine can clamp uneven hundreds.

A rake for any dozer

Solesbee Blade-Mounted Dozer RakesSolesbee’s Blade-Mounted Dozer Rakes will match practically any dozer blade with out customization, the corporate says. That’s as a result of the rakes have an prolonged upright with a number of holes to line up with the dozer blade when mounting. The corporate additionally gives all of the pins and brackets wanted for mounting. The rakes are made for land clearing, raking brush and piling bushes and branches. They function a C-curve design that rolls brush and particles, which the corporate says makes it straightforward to windrow materials whereas minimizing the quantity of dust pushed with it.

Rip, pry, load stumps with one device

Nye Ultra Heavy Duty Stump HarvesterNye’s Extremely Heavy Obligation Stump Harvester can rip, pry, shake, break up, crosscut and cargo. The corporate says it might probably break up any stump that matches its jaws and harvest stumps in place. It could actually take away dust and rocks from stumps earlier than they’re processed. The primary slicing blade is located on the operator’s aspect for higher visibility and management. The attachment is product of quenched and tempered alloy metal with hardened enable pins and bushings. The tooth are replaceable and the blade could be sharpened simply, the corporate says. The harvesters are available in hydraulic and mechanical fashions.


Grade, rake, clear with one device

Virnig Power RakeVirnig designed its Energy Rake to grade, rake and take away particles. The attachment incorporates a bi-directional drum that circumstances the soil in each instructions for fast seedbed preparation. It additionally achieves a clean, even end when raking due to the machine’s floating design, which retains the rake stage, the corporate says. The rake could be manually angled 25 levels in both course. A hydraulic angle is non-compulsory for altering the rake angle from the cab. The rake is offered in sizes of 6 ft or 7.5 ft and has a really helpful movement charge of 15 to 25 gallons per minute.

Dig cleaner holes

General Equipment Dig-R-TachNormal Tools designed its Dig-R-Tach drill attachments for small and enormous hydraulic methods. For smaller methods, the Sequence 16 balances decrease movement volumes with auger diameters to dig cleaner holes with much less free soil and particles. It incorporates a two-speed chain and a hydraulic movement vary of 5 to 20 gallons per minute. It’s appropriate with skid steers, small excavators, knuckleboom cranes and small backhoes. For greater jobs, the Sequence 24 is designed for excavators and backhoes and operates in a hydraulic movement vary of 15 to 25 gallons per minute. It could actually ship 2,018 foot-pounds of torque.

A substitute for stump grinding

Leading Edge Attachments Wolverine Stump Ripper The brand new Wolverine Stump Ripper from Main Edge Attachments is a sooner different to stump grinding, permitting the operator to take away a stump with out leaving grindings or stays that may trigger sinkholes, the corporate says. As a substitute of grinding a stump, the Wolverine goes beneath it and cuts and rips the roots. When paired with a thumb, the machine can pull out the stump, forsaking solely the roots. The stump can then be shaken and loaded. The Stump Ripper is designed for backhoes and excavators. It may be linked by pins or a fast coupler, the identical as a bucket.