New Talbert fixed-neck 35FG-BVTL trailer affords low peak and straightforward positioning for excavator booms

For optimum maneuverability, the 35FG-BVTL provides you an 84-inch swing radius and 18-inch kingpin.

In the event you’re on the lookout for a 35-ton trailer with a 22-foot lengthy deck, the brand new Talbert Manufacturing 35FG-BVTL affords hydraulic ramps for protected and environment friendly loading and one of many lowest deck heights within the trade.

Designed for small- to mid-size development machines, Talbert’s new fixed-neck trailer has a 10-inch street clearance to maximise headroom and a 30-inch loaded deck peak, 40 inches for the rear bridge.

A 36-inch sloping beavertail with a 15-degree load angle coupled with full-width plate and traction bars exterior the principle beams optimizes rear loading.

A part of Talbert’s Double Drop Sequence, the 35FG-BVTL has an general size of 48 ft. The deck is Eight ft 6 inches vast, with an Eight-foot, 6-inch rear bridge part. Recessed cross members within the rear bridge permit for straightforward positioning of an excavator growth.

talbert fixed neck trailer with 36-inch beavertail with a 15-degree load angle

A 36-inch beavertail with a 15-degree load angle optimizes rear loading.

The fastened neck design is a cheap different to gooseneck designs for contractors who don’t want a entrance unload operation. Deck materials is apitong wooden, chosen for its excessive energy and sturdiness.